FIBRE OPTICS

also spelled Fiber Optics, the science of transmitting data, voice, and images by the passage of light through thin, transparent fibres. In telecommunications, fibre optic technology has virtually replaced copper wire in long-distance telephone lines, and it is used to link computers within local area networks. Fibre optics is also the basis of the fibrescopes used in examining internal parts of the body (endoscopy) or inspecting the interiors of manufactured structural products. The basic medium of fibre optics is a hair-thin fibre that is sometimes made of plastic but most often of glass. A typical glass optical fibre has a diameter of 125 micrometres (mm), or 0.125 mm (0.005 inch). This is actually the diameter of the cladding, or outer reflecting layer; the core, or inner transmitting cylinder, may have a diameter as small as 10 mm. Through a process known as total internal reflection, light rays beamed into the fibre can propagate within the core for great distances with remarkably little attenuation, or reduction in intensity. The degree of attenuation over distance varies according to the wavelength of the light and to the composition of the fibre. When glass fibres of core/cladding design were introduced in the early 1950s, the presence of impurities restricted their employment to the short lengths sufficient for endoscopy. In 1966, electrical engineers K.C. Kao and G.A. Hockham, working in England, suggested using fibres for telecommunication, and within two decades silica glass fibres were being produced with sufficient purity that infrared light signals could travel through them for 100 km (60 miles) or more without having to be boosted by repeaters. Plastic fibres, usually made of polymethylmethacrylate, polystyrene, or polycarbonate, are cheaper to produce and more flexible than glass fibres, but their greater attenuation of light restricts their use to much shorter links within buildings or automobiles. Optical telecommunication is usually conducted with infrared light in the wavelength ranges of 0.80.9 mm or 1.31.6 mmwavelengths that are efficiently generated by light-emitting diodes or semiconductor lasers and that suffer least attenuation in glass fibres. Fibrescope inspection in endoscopy or industry is conducted in the visible wavelengths, one bundle of fibres being used to illuminate the examined area with light and another bundle serving as an elongated lens for transmitting the image to the human eye or a video camera.