RANGE FINDER

any of several instruments used to measure the distance from the instrument to a selected point or object. One basic type is the optical range finder modeled after a ranging device developed by the Scottish firm of Barr and Stroud in the 1880s. The optical range finder is usually classified into two kinds, coincidence and stereoscopic. The coincidence range finder, used chiefly in cameras and for surveying, consists of an arrangement of lenses and prisms set at each end of a tube with a single eyepiece at its centre. This instrument enables the user to sight an object by correcting the parallax resulting from viewing simultaneously from two slightly separated points. The object's range is determined by measuring the angles formed by a line of sight at each end of the tube; the smaller the angles produced, the greater is the distance, and vice versa. The stereoscopic range finder operates on much the same principle and resembles the coincidence type except that it has two eyepieces instead of one. The design of the stereoscopic instrument makes it more effective for sighting moving objects. It was widely used for land-gunnery ranging during World War II. Since the mid-1940s, radar has supplanted optical range finders for most military target-ranging operations. This nonoptical ranging device determines the distance to a target by measuring the time it takes radio pulses to reach the object, bounce off, and return. Advances in laser technology led to the development in 1965 of another kind of ranging instrument known as the laser range finder. It has largely replaced coincidence range finders for surveying and radar in certain military applications. The laser range finder, like radar, measures distance by timing the interval between the transmission and reception of electromagnetic waves, but it employs visible or infrared light rather than radio pulses. Such a device can measure distances of up to 1 mile (1.61 km) to an accuracy of 0.2 inch (0.5 cm). It is especially useful in surveying rough terrain where remote points have to be located between rocks and brush.