TRUSS

in engineering, a structural member usually fabricated from straight pieces of metal or timber to form a series of triangles lying in a single plane. (A triangle cannot be distorted by stress.) A truss gives a stable form capable of supporting considerable external load over a large span with the component parts stressed primarily in axial tension or compression. The individual pieces intersect at truss joints, or panel points. The connected pieces forming the top and bottom of the truss are referred to respectively as the top and bottom chords. The sloping and vertical pieces connecting the chords are collectively referred to as the web of the truss. Trusses were probably first used in primitive lake dwellings during the early Bronze Age, about 2500 BC. The first trusses were built of timber. The Greeks used trusses extensively in roofing, and trusses were used for various construction purposes in the European Middle Ages. Andrea Palladio's I quattro libri dell'architettura (1570; Four Books on Architecture) contained plans for timber trusses. A major impetus to truss design came in the development of covered bridges in the United States in the early 19th century. Cast iron and wrought iron were succeeded by steel for railroad truss bridges. The two systems most commonly used are the Pratt and the Warren; in the former, the sloping web members are parallel to each other, while, in the latter, they alternate in direction of slope. Trusses are also used in many kinds of machinery, such as cranes and lifts, and in aircraft wings and fuselages. in medicine, device for holding a reduced hernia in place. In treating infants, an interlacing of yarn forms a supportive pad that is placed over the herniated area. In adult treatment, a pad of heavier material is placed over the hernia to prevent protrusion. A truss is usually a temporary expedient and seldom used as a substitute for surgical repair. A nasal truss is a trusslike device used to hold bones of the nose in place after a fracture.