MAGNETIC PERMEABILITY

relative increase or decrease in the resultant magnetic field inside a material compared with the magnetizing field in which the given material is located; or the property of a material that is equal to the magnetic flux density B established within the material by a magnetizing field divided by the magnetic field strength H of the magnetizing field. Magnetic permeability m (Greek mu) is thus defined as m = B/H. Magnetic flux density B is a measure of the actual magnetic field within a material considered as a concentration of magnetic field lines, or flux, per unit cross-sectional area. Magnetic field strength H is a measure of the magnetizing field produced by electric current flow in a coil of wire. In empty, or free, space the magnetic flux density is the same as the magnetizing field because there is no matter to modify the field. In centimetregramsecond (cgs) units, the permeability B/H of space is dimensionless and has a value of 1. In metrekilogramsecond (mks) and SI units, B and H have different dimensions, and the permeability of free space (symbolized m0) is defined as equal to 4p 10-7 weber per ampere-metre so that the mks unit of electric current may be the same as the practical unit, the ampere. In these systems the permeability, B/H, is called the absolute permeability m of the medium. The relative permeability mr is then defined as the ratio m/m0, which is dimensionless and has the same numerical value as the permeability in the cgs system. Thus, the relative permeability of free space, or vacuum, is 1. Materials may be classified magnetically on the basis of their permeabilities. A diamagnetic material has a constant relative permeability slightly less than 1. When a diamagnetic material, such as bismuth, is placed in a magnetic field, the external field is partly expelled, and the magnetic flux density within it is slightly reduced. A paramagnetic material has a constant relative permeability slightly more than 1. When a paramagnetic material, such as platinum, is placed in a magnetic field, it becomes slightly magnetized in the direction of the external field. A ferromagnetic material, such as iron, does not have a constant relative permeability. As the magnetizing field increases, the relative permeability increases, reaches a maximum, and then decreases. Purified iron and many magnetic alloys have maximum relative permeabilities of 100,000 or more.